Clean and Stable Compressed Air
Compressed Air Filtration for Cleaner Air
Matched 3-stage or 5-stage filtration systems for UMW Air compressors, designed to remove oil, water and particles for cleaner air.
3 / 5-Stage
Filtration Options
Matched Systems
For UMW Air compressors
Key Part
Complete Air Treatment
Core Advantages of Air Compressor Filter
3-Stage / 5-Stage Filtration
3-stage filtration for standard industrial air; 5-stage filtration for higher-pressure or cleaner air requirements.
Matched with Compressor Systems
Filters are selected according to compressor model, power and working pressure.
Oil, Water and Dust Removal
Removes oil aerosols, water droplets, dust and pipeline impurities, processing precision can reach 0.01 μm.
Low Pressure Drop Design
Optimized airflow structure helps reduce pressure loss and maintain stable air supply.
Complete Air Treatment Solution
Works with the air compressor, air receiver and refrigerated dryer as part of a complete system.
Matched with UMW Air Compressor Systems
UMW Air filters are selected according to compressor model, power and working pressure. Instead of using a fixed filter configuration for all machines, UMW Air matches the filtration system with the actual compressor structure and operating conditions.
3-Stage or 5-Stage Precision Filtration
For systems with an operating pressure of 10 bar or less, three-stage filtration is sufficient; for systems with pressures exceeding 10 bar, five-stage filtration is employed to enhance the removal of oil, water, and particulates.
- Water removal
- Oil removal
- Dust removal
0.01μm
0.003ppm
air supply
cleaner air demand or
sensitive equipment
Low Pressure Drop Structure for Stable Air Supply
The precision filter is an important part of the compressed air treatment system. It works together with the air compressor, air receiver and refrigerated dryer to further remove residual moisture, oil aerosols and particles before compressed air reaches the production line.
How to Choose the Right Compressed Air Filter Configuration
Micro Air Compressor
4-7.5kW
C-T-A
- 3-stage for ≤10 bar
- 5-stage for >10 bar
Prime Air Compressor
11-22kW
C-T-A / Q-P-S
- ≤15kW QPS, >15kW CTA
- 3-stage for ≤10 bar
- 5-stage for >10 bar
Core Air Compressor
30-110kW
C-T-A
- 3-stage for ≤10 bar
- 5-stage for >10 bar
Mega Air Compressor
132-355kW
C-T-A
- 3-stage for ≤10 bar
- 5-stage for >10 bar
Selection based on compressor power and airflow helps avoid under-sizing, over-sizing and unnecessary energy waste.
Applications of Compressor Filtration
Detailed Specifications of Air Compressor Filter
| Parameter | Specification |
|---|---|
| Rated Air Flow | 1.5–25 m³/min |
| Filtration Configuration | 3-Stage or 5-Stage Filtration |
| Dust Removal Accuracy | Down to 0.01 μm |
| Oil Removal Accuracy | 0.01 ppm for 3-stage filtration; down to 0.003 ppm for 5-stage filtration |
| Working Pressure | 1.0–3.0 MPa, depending on filter model |
| Initial Pressure Drop | 0.2–0.3 bar |
| Pressure Loss | 0.3 bar |
| Connection Size | G3/4, G1, G1 1/2, G2 or G2 1/2 |
| Filter Element Material | High-efficiency glass fiber |
| Housing Material | Aluminum alloy; carbon-steel housing available for selected high-pressure models |
| Drainage Method | Manual drain |
| Maximum Operating Temperature | Up to 80°C for applicable models |
FAQ
3-stage filtration is used for compressor systems at 10 bar or below. 5-stage filtration is used for systems above 10 bar or applications requiring cleaner compressed air.
Yes. The filter is usually used together with an air receiver and refrigerated dryer to form a complete compressed air treatment system.
The replacement cycle depends on operating hours, air quality and pressure drop. It is recommended to replace the filter element every 3,000–4,000 hours or when the pressure drop exceeds 0.35 bar.
Compressed air may contain water droplets, oil aerosols, dust and pipeline impurities. Precision filters help remove these contaminants and protect downstream equipment.
Yes. UMW Air can provide air compressors, air receivers, refrigerated dryers and matched precision filters for complete compressed air solutions.
Yes. UMW Air can support OEM and customized compressor system configurations according to project requirements, including matched filters, dryers, air receivers and related accessories.
CONTACT UMW AIR
Need Help Choosing the Right Air Compressor Filter?
Our engineers will help recommend a suitable compressed air filtration and compressed air treatment solution for your factory.
- Matched 3 / 5-stage filter configuration
- Matched with UMW Air compressor systems
- Complete compressed air treatment solution
- Fast engineering response within 24 hours
68 Gongye South Road, Jinan, Shandong, China, 250000
Request a Quote
Tell us your required pressure, air flow, voltage and application.